We are required to choose one building and modelling it using software. Create it by using the orthographic of building. WIP is needed to act as the evidence of work.
LEARNING OUTCOME
-To produce 3D model of a selected architectural design using 3DS Max/Rhinoceros or both.
-To record Work in Progress (WIP) as progressive evidence of the working process.
WIP SCREENSHOTS
 |
| 1.Import the orthographic from autocad |
 |
| 2.Change the color of drawing for easier view |
 |
| 3.Rotate the elevation to 90 degree |
 |
| 4.Attach elevation to plan |
 |
| 5.Elevate the plan |
 |
| 6.Extrude the slab |
 |
| 7.Extrude the aluminium mullion |
 |
| 8.Extrude the column |
 |
| 9.Extrude the glass window and door |
 |
| 10.Extrude the wall inside the 1st floor |
 |
| 11.Extrude the cylinder tower |
 |
| 12.Attach the wall to tower |
 |
| 13.Create the louvers |
 |
| 14.Extrude the bottom tower using loft |
 |
| 15.Use sweep 1 to create the top tower |
 |
| 16.Draft model |
 |
| 17.Make roof |
 |
| 18.Create small cylinder for top tower |
 |
| 19.Make it exceed the inner surface |
 |
| 20.Make hole for small cylinder |
 |
| 21. Create louver on top tower |
 |
| 22.Make spiral staircase using Polar Array |
RENDERING IMAGES
From this project, i learned how to modelling a building by using software such as rhino and 3ds max.It give us the knowledge so that we can apply in futute work.
